End Suction Pump + Motor                                                                                                                                           +

                                                            

   Flow up to 110m3/hr*
      
   Head up to 80m*
      
   Temperature up to 600 C*
      
   DN 40-80*
      
   Design Features Mounting: Horizontal Monobloc design Stage: Single With TEFC  enclosure & class F, Insulated IP 44 motors(2 – 30 hp*) Mechanical Seal/Gland Packing Pre-greased, double sealed bearings
      
   Optional Features    Submersible Monobloc design Single & Three phase motors IP 55 motors
      
   Material of Construction Material of Construction Impeller-Cast Iron/Bronze
      
   Applications 
Irrigation
Water supply
HVAC
Fire fighting
General Industry
      
   Prime movers  Electric motors
Horizontal Multistage                                                                                                                                                    +

                                                                      

   Flow up to 1000m3/hr*
      
   Head up to 1800m*
      
   Temperature up to 1600 C*
      
   DN 32-250*
      
   Design Features Mounting: Horizontal Stages: 3 to 15 Radial Flow Impellers with vane diffusers Mechanical Seal/Gland Packing Grease lubricated antifriction bearings
      
   Optional Features    
Mounting: Centreline/Vertical
Multi-outlet design
Balance valve design for axial thrust Bush
Bearing /Roller Bearing
      
   Material of Construction 
Cast Iron, Bronze, Ducktile Iron,
Cast Steel, Ni Resist, Stainless Steel,
Duplex Stainless Steel & special alloys
      
   Applications 
Mine dewatering
Descaling in steel mills
Boiler Feed application
Reverse Osmosis for Desalination Plants
Water Supply/General Industry
Fire fighting
      
   Prime movers  
Electric motors
Diesel Engines
Steam Turbine
Vertical Inline Pumps                                                                                                                                                    +

                                                                   

   Flow up to 800m3/hr*
      
   Head up to 110m*
      
   Temperature up to 1400 C*
      
   DN 32-250
      
   Design Features 
Low Pressure Inline pump
Stage: Single Stage
Close coupled design
KTL Coating for Corrossion
Protection
3Phase standard IEC IP SS motors
Mechanical seal
      
   Optional Features    
VFD on motor
High efficiency motors
Flameproof motors
Twin head pumps
      
   Material of Construction 
Casing-Cast Iron/Bronze
Impeller – Cast Iron/Bronze
      
   Applications 
Building Service, Hot water, Water Glycol mixture
Cold water without abrasive,Substances.
Horizontal Split Case Pumps                                                                                                                                        +

                                                                          

   Horizontal Spilt case Pump
      
   Flow up to 18000m3/hr*
      
   Head up to 270m*
      
   Temperature up to 1200 C*
      
   DN 50-1200*
      
   Design Features 
Mounting: Horizontal
Stages: One/Two/Three stage
Single/Double suction Impellers
Grease/Oil lubricated antifriction
Bearings
Mechanical seal/Gland Packing
      
   Optional Features    
Mounting: Centre line/Vertical
Drive Connection: Direct/Cardan Shaft Bush Bearings
Staggered vane design for Fan Pump Application
Special Suction/Delivery orientation*
Instrumentation & Controls
      
   Material of Construction 
Cast Iron, Bronze, Ducktile Iron
Cast Steel, Ni Resist, Stainless Steel,
Duplex Stainless Steel & special alloys
      
   Applications 
Water Supply/ General Industry
Ports & Docks/ Fire fighting
Irrigation/Marine Desalination
      
   Prime movers  
Electric motors/Diesel Engines Steam
Turbine with gear box or cardan shaft
End Suction Pumps                                                                                                                                                         +

                                               

   Flow up to 750m3/hr*
      
   Head up to 270m*
      
   Temperature up to 1200 C*
      
   DN 32-150*
      
   Design Features 
End suction Top Discharge
Mounting: Horizontal
Stage: Single
Back Pullout design
Closed Impeller
Mechanical Seal/Gland Packing
Grease lubricated antifriction bearings
      
   Optional Features    
Mounting: Centre line/Vertical
Semi-open Impeller
Oil lubricated antifriction bearings
      
   Material of Construction 
Cast Iron, Bronze, Ducktile Iron
Cast Steel, Ni Resist, Stainless Steel,
Duplex Stainless Steel & special alloys
      
   Applications 
General Industry
Chemical & Process
Water supply
Building Service / Fire fighting
Irrigation / Sprinkler system
      
   Prime movers  
Electric motors
Diesel Engines